TBVECHI Spot Welding Machine for Jewelry, 800W 110V Gold Silver Adjustable Argon Pulse Spot Welder Equipment 0.5-80A

Price: $169.00
(as of Jun 13, 2024 18:10:59 UTC – Details)

Specification:
Power supply: AC110V
Power: 800W
Welding current: 0.5-80A continuously adjustable (pulse ignition)
Welding range: 0.2-1.3mm


Use range:
It can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.

Instructions:
1. Before using the welder, first check if the power supply meets the operating voltage.
2. Connect the welder output wire to the screw of the corresponding output stage (tighten the nut when the output wire is connected to the output pole)
3. When working, clamp the workpiece with the clip on the output black line, close to the tungsten needle (depending on the size and shape of the workpiece, generally the distance between the tungsten needle and the workpiece is between 0.5-1 mm). After the welding position is fixed, Jog the foot switch, and a high-temperature arc between the workpiece and the tungsten needle instantly welds the workpiece.
4. The discharge end of the tungsten needle must be kept sharp before use and during use to maintain a good discharge state.
5. Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.


Standard accessories:
One host
power cable
Foot switch
Workpiece clip
Tungsten needle
Torch needle holder
Instruction manual
▶【MAIN PARAMETERS】Power supply: AC110V. Power: 800W. Welding current: 0.5-80A continuously adjustable (pulse ignition). Welding range: 0.2-1.3mm.
▶【USE RANGE】The Spot Welder can weld gold, silver, K gold, gold, palladium, platinum with a diameter of 1.3MM. Titanium, copper, and stainless steel jewelry with a diameter of about 1MM can be welded. Silver, copper, jade bracelets, small rings, earrings , Skilled can also weld small parts inside dental steel wire thermocouple clock, etc.
▶【PRECAUTIONS】If the place where the welder is placed is wet or not used for a long time, it will be damp. If it is found that the above phenomenon should be dried before use, the machine should be well grounded. Please pay attention to safety when using.
▶【WELDING PERFORMANCE】Welding can change the output pulse current according to the size of the workpiece, the size of the solder joints, and the process requirements (the machine can weld 0.5-1.5MM). When the potentiometer is rotated clockwise, the output pulse current increases, whereas the output pulse current decreases.
▶【PACKAGE CONTENTS】One host, power cable, Foot switch, Workpiece clip, Tungsten needle, Torch needle holder, Instruction manual. The simple structure and complete accessories allow you to install this product in minutes, saving you time and labor.