Speaker 3 Watt 8 Ohm Compatible with Arduino Motherboard, JST-PH2.0 Interface. It is Ideal for a Variety of Small Electronic Projects.

Price: $7.99
(as of May 18, 2024 04:30:22 UTC – Details)

CQRobot painstakingly deploys this passive speaker small speaker for the Makers and electronic enthusiasts, this small passive speaker with JST PH2.0 interface, the internal resistance is 8 ohms, the power of it is 3 watts. Strip size, with mounting screw, suitable for all kinds of sound source fabrication, the sound is clear and melodious without distortion.

TECHNICAL SPECIFICATIONS
– Impedance: 8 Ohm Plus/Minus 15% at 1000Hz.1V
– Power Rating: Rated Power / Maximum Power 3.0W / 3.5W
– FO: 450Hz Plus/Minus 150Hz at 1.0V
– S.P.L: 94dB Plus/Minus 3dB/1.0 Watt 0.1Meter; Average At1000, 1200, 1500, 2000Hz.
– Frequency Range: FO to 10,000Hz. Average SPL-10dB.
– Distortion: 10% Maximum at 1000Hz.1.0V.
– Abnormal Sound Test: Must be Normal Tested by 4.9; Volts.Sine wave for 50 to 5KHZ.
– Polarity: Diaphragm Shall Move Forward When Apply a Positive DC. Red “+” or “Marked” Terminal.
– Operating Temperature: -25 Degree Celsius to +65 Degree Celsius.
– Storage Temperature: -25 Degree Celsius to +65 Degree Celsius.
– High Temperature Storage Test: 65 Degree Celsius Plus/Minus 2 Degree Celsius – 96 Hours.
– Low Temperature Storage Test: -25 Degree Celsius Plus/Minus 2 Degree Celsius – 96 Hours.
– Size: 70mm * 31mm * 16mm.
– Screw hole distance: 24mm * 63mm.
– Interface: JST PH2.0 2-Pin.
– Interface cable length: 40cm.
– Total weight: 24g.
SHIPPING LIST
2 * Passive Speaker 3 Watt 8 Ohm(JST-PH2.0 Interface)
Power: Rated Power / Maximum Power 3.0W / 3.5W.
Impedance: 8 Ohms Plus/Minus 15%.
Size: 70 mm * 31 mm * 16 mm / 3.1 inch * 1.2 inch * 0.63 inch (L* W * T).
Compatible With Arduino, Robot, Raspberry Pi, Advertising Machine, Game Machine, Integrated Machine Special Speaker etc, Projects.