Laser Spot Welder, Laser Jewelry Welder, Welding Machine Pulse Sparkle for the Rapid Welding of Platinum,Gold, K Gold, Silver, and Steel.

Price: $139.99
(as of Jun 13, 2024 14:39:57 UTC – Details)

Description
This spot welding machine features high-quality sheet metal housing, which is very durable. 600W power can realize spot welding in a shorter time. High-precision current regulations and tungsten needle welding head bring you professional, smooth, and solid welding. It is the best partner for family DIY and general maintenance work!
How to Operate
1. Connect the power cord.
2. Install the hand-held welding gun/pedestal, fixture, foot switch, and tungsten needle in turn
3. Turn on the power switch.
4. Adjust the height of the tungsten needle(the welding head should extend about 1.96in.).
5. Adjust the coarse tune knob and fine tune knob.
6. Adjust welding distance.
7. Hold the workpiece with the fixture.
8. Step on the foot switch with your foot (move your foot away quickly), and the spot welding is completed.
Specifications
Material: Sheet Metal
Color: Blue
Model: 80A
Welder Type: Electric Spot Welder
Power: 600W
Plug: US Standard
Welding Range: 0.5-1.5mm/0.02-0.06in
Input Voltage: 110 V
Product Size: 25.5*24.8*13cm/10*9.8*5.1in
Packing Size: 37*28*18cm/14.56*11.02*7.08in
Gross Weight: 4.9kg/10.8lbs
Package Included
1 x Jewellery Spot Welding Machine
1 x Power Cord
1 x Foot Switch
1 x Tungsten Needle
1 x Fixture
1 x Hand-held Welding Guns
1 x Pedestal
1 x English Manual
Other Accessories for Use
Notes
1. Before using the welding machine, check whether the power supply meets the operating voltage. Connect the output wire of the welding machine to the screw of the corresponding polarity (tighten the nut when connecting the output wire to the output polarity).
2. When working, clamp the workpiece with the fixture, close to the tungsten needle. Depending on the size and shape of the workpiece, generally, the distance between the tungsten needle and the workpiece is 0.007-0.04in. The discharge end of the tungsten needle must be sharp before and during use.
3. Please do not put the welding machine in a damp place and keep it dry.
4. Please don’t step on the foot switch for a long time. Step on it and move away immediately. If the switch is pressed for a long time and the machine is in a short circuit state, the internal circuit will be burned.
5. Strong light will be released during welding. Please wear protective glasses during welding and do not look directly at the welding part.
6. When stepping on the foot switch, do not touch the metal part of the tungsten needle and the fixture at the same time, otherwise, there will be a feeling of acupuncture.
7. Non-professional personnel are not allowed to disassemble and repair. There is a high voltage inside.
8. Please note that only 0.5-1.5mm diameter can be welded. Too thick or too thin can not be welded.
9. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
10. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.
【Good Welding Effect】Using the principle of plasma high-frequency discharge, a high-temperature arc is generated between the workpiece and the tungsten needle to form a molten pool at the metal welding junction instantaneously, allowing for smooth, firm, fast, and efficient welding.
【Two Operation Modes】According to the specific workpiece and your operating habits, a hand-held welding gun and a welding gun with a bracket are provided for your selection and replacement.
【Easy to Carry】It is lightweight, compact, and has a carrying handle on the top, making it convenient for you to carry when you go out to work.
【Intelligent Adjustment】According to the size of the workpiece, solder joint, and the process requirements, you can precisely adjust the output current through the coarse adjustment knob and the micro adjustment knob.
【Good Heat Dissipation】Multiple cooling holes on the machine ensure stable welding performance and prevent it from burning out after the long-term operation.