58 LBS Thrust 8 Speed 12V Electric Outboard Trolling Motor for Fishing Boats, Kayak, Inflatable Boat Saltwater Use Transom Mounted with Adjustable Handle, Short Shaft

Price: $139.90
(as of May 26, 2024 07:58:50 UTC – Details)

Details
➤ Tightened Brackets: The tightened brackets are used to secure the thrusters and transoms of the ship so that the thruster will not fall from your boats.
➤ High Power Battery Clamp: The clamp is more durable and wear-resistant under high currents. And they have good conductivity.
➤ Circuit Breaker Protector: The trolling motor with overload, short-circuit, and under-voltage protection settings can protect wiring and power.

Application
The trolling motor is suitable for a variety of small watercraft, such as fishing boats, dinghies, and inflatable boats.

Specification
Model: L58
Speed Control: F5-R2
Motor Type: Brush Motor
Rated Voltage: 12V
Rated Speed(R/min): 1700
Rated Current: 51A
Rated Power: 612W
Control Handle: Retractable
Maximum Speed: 10km/h
Noise DB: 50db
Battery Model: 12V 150A Batteries
Propeller: 3 leaves, 26.9cm/10.6in
Shaft Length :15.7inch (40cm) / Short Shaft
Package Size: 101*46*16CM/39.76*18.11*6.29inch
Product Height: 110cm/43inch
Net Weight: 9.5kg/20.94lb
Gross Weight: 11.5kg/25.35lb
Thrust: 58lbs

Installation
1. Tear off the sticker at the spring on the handle.
2. Take out the handle, and align the handle with the interface at the inner shell of the handle.
3. Press the handle spring with one hand and push the handle in with the other hand. After a crunching sound is heard, the handle is installed.
4. Take out the cylindrical card pin and insert it into the round hole of the drive rod (note that the length of both ends needs to be consistent).
5. Align the back of the propeller with the card slot and the card pin horizontally, and then tap into the propeller with force.
6. Put in the card flap, then screw the nut to complete the installation.
7. Take the fins out of the box and insert them into the fin slot.
8. Put the included screws into the screw holes of the fins and put the nuts into the other end. Hold them down.
9. Then tighten the screws with the Phillips screwdriver.
10. If you have any problems, please feel free to contact us. We will reply and solve the problem for you as soon as possible.

Package Included
1*Trolling Motor
1*Power Propeller
1* Circuit Breaker Protector
1*Battery Clamp
1 Set of Screws
1*English Manual
1x Oil-pumping Pipe
1x Flameout Rope
1x Tool Kit
1x English Manual
All Accessories for Assembly
All Accessories for Installation
✅ Great Durability: The trolling motor is made of pure copper, which has excellent electrical conductivity, thermal conductivity, ductility and corrosion resistance.
✅ High Efficiency: The trolling motor with a pure copper motor can overcome huge water resistance to increase the speed of driving and improve its efficiency.
✅ Non-deformable: The suspension bracket is made of high-strength aluminum alloy, which can ensure that the bracket is not deformed by repeated disassembly and installation.
✅ Fin Streamline Design: When it collides with an object underwater, the design can protect the propeller that is running at high speed.
✅ Easy to Drive: The main rod is made of aluminum. Its lightweight will not increase the entire weight of your boat and the difficulty of driving.
✅ Adjustable Depth and Angle: Its depth and angle can be freely adjusted according to the actual situation and your special needs.
✅ Adjustable Gears: The fixed tiller has 5 forward and 3 reverse speeds. You can smoothly switch the speed and change the direction during driving.
✅ Real-time Monitoring of Power: The top of the thruster has a real-time display of the battery power, allowing you to check the power situation any time and prepare for charging in advance to avoid running out of power in the middle of the voyage.
✅ Propeller Design: The propeller is designed with a multi-dimensional optimization iterative method to improve propulsion efficiency and reduce propeller losses.