Spurtar Brake Caliper Press Tool, Brake Caliper Tool Spreader, 4 in 1 Universal Disc Brake Caliper Compression Tool Ratchet Piston Spreader Automotive Tools for Car Brake Repair Installation Blue
Price: $19.97
(as of Jun 08, 2024 09:57:23 UTC – Details)
Product Description
Spurtar Brake Caliper Press Tool, Car Ratcheting Brake Caliper Piston Spreader Press Tool
Time for a new set of pads? Spurtar brake caliper tool helps you to quickly and easily compress and align pistons into place to make room for thick replacement brake pads. Our professional brake caliper press is suitable for all disc brake caliper press ratchet wheels, brake tools and brake cylinder adjustment groups. Perfect tool for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers.
Spreads Evenly
Centrally located Spurtar brake pad spreader ratchet evenly distributes force to prevent misalignment of pistons to create space for easy removal and installation of bake pads
Heavy-duty Material
Brake caliper compression tool is made of premium quality hardened steel material, solid made.
Non-Slip Handdle
Brake piston compressor tool comes with cushioned grip handle which provides comfortable and easy grip when using
Easy Removing Disc Brake Caliper
This item is for disc brake, not for drum brake. Detaching the brake caliper from the hub is fairly straightforward, as most calipers are held on by just two bolts. Some cars use brake pad wear sensors, which should be removed before you do anything. Once the caliper is unbolted, secure it to the car with your rope or bungee cord in such a way that there’s slack in the brake line (stretching or damaging it could cause problems down the line)
Using Brake Piston Compressor
When you have the caliper off the car, stick the brake piston compressor tool in between and use it to compress the piston(s) until the cylinder sits flush with the caliper face. Once you have access to the old pads, pop them out; you should be able to remove them by hand. Now place the new ones in. The base plate ends should have a specific shape to fit perfectly into it. Please check the Disc Brake size first.
Attention When Replacing Brake Pad’s
If you fail to compress your pistons before putting the new pads in, they simply fit back onto the rotor. Make sure you put the pads on facing the correct direction. If the caliper is on sliders, always make sure those are clean. The pads’ manufacturer will likely outline a bedding procedure found either printed on the box or included in the installation instructions.
Specifications: 1x Brake Caliper Piston Spreader Tool 360 Degree Swing Heavy-Duty Hardened Steel Blue anti-slip silicon handle Weight 1.8 lb / 800 g Package include:
1 x Brake Piston Caliper
2 x Hooks
Universal Disc Brake Caliper Pistion Tool Necessary DIY tool for brake caliper replacement
Easy to install, easy to remove, can compress your brake pistons effortlessly in seconds. Our Brake caliper tool can be used for most car, truck, van, etc
A small tip for a case of unwork:
1. Both spreader plates need pressure to start the ratchet
2. Before expanding, leave a little free thread and then swing the wrench
Brake Caliper Expander is Suitable for Most Vehicles
• Doing brake pad replacement • Resetting the piston • Changing the brake • Doing other brake works • Twin piston fixed calipers • Quad piston fixed calipers • Single piston floating calipers • Twin piston floating calipers
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Add to Cart
Customer Reviews
4.3 out of 5 stars
183
4.5 out of 5 stars
7
4.4 out of 5 stars
1,547
4.4 out of 5 stars
863
4.2 out of 5 stars
804
4.5 out of 5 stars
7
Price
$17.79$17.79 $21.99$21.99 $17.79$17.79 $14.99$14.99 $11.99$11.99 $13.97$13.97
Application
Perfect for replacing damaged/old throttle cables. Loosen the tension on the camshaft phaser timing chain tools during Camshaft and phaser service procedures on 3.6L Engine Quick accurate checking of the castor and camber angle Inner Tie Rod Hex Wrench Tools Inner Tie Rod Removal Tool Camshaft Locking Tool Set
Suitable for
Perfect for replacing damaged/old throttle cables. VW Chrysler Jeep Dodge Grand Cherokee Wrangler 3.6L Engine For most vehicle wheel alignments within a measurement range from -5 up to +5 degrees Easily removes inner tie rod ends without removing rack and pinion Able to remove inner tie rod without removing the outer tie rod Replace10200A 10202 10369A
Size range
24“ 10200A+10202+10369A 6 PCS Cam Locking Tool with a lock box 4.9″ x 1.18″ x 0.78″ | 12.5 x 3 x 2 cm 1”-1.65” | 27-42mm 3/8” | 9.5mm 10200A+10202+10369A 6 PCS Cam Locking Tool
Material
Stainless Steel + Aluminum Plastic Brushed Alumnium Heavy-Duty Steel Heavy-Duty Steel Plastic
Brand
Spurtar Toolwiz Toolwiz Toolwiz Toolwiz Toolwiz
MULTIFUNCTION 4-1: Spurtar Brake Caliper Compression Tool is ideal for automotive brake pump adjustment. Works on single piston, dual piston and quad piston, as well as single and twin piston floating calipers. This item is for disc barke, not for drum brake.
RATCHETING: Automotive brake caliper centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components
360-DEGREE RATCHETING: Ratchet technology of this Brake Caliper Tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates
EASY TO USE: This caliper piston tool extended reversing lever allows for easy change from spreading to retracting. Cushioned grip handle provides comfortable and easy grip
BUILT TO LAST: Constructed of carbon steel, the ratcheting screw and pad plates are designed for maximum strength and durability, which is an useful brake tools for automotive replacement brake system parts
